A time-period report (TP Report) filters result data from a defined period in the test. A TP report can be created from a multi-test comparison report by selecting a period from each of the compared test results. For example, when comparing multiple tests with a step-load, a comparison report can be created just for the steady state of each test result. 

Note

A multi-test TP report can be created from a multi-test report with a maximum of 4 test results.

Creating a multi-test TP Report

  • From the Multi-test report toolbar, click the TP Report (a) button to open the TO report parameters dialog.

  • Enter the start time (b) and end time (c) of the filtered period for each test result and click the Refresh button (d).

  • Alternatively, zoom in on each of the user graphs. 
  • Click the Select Steady-States (e) button to automatically select the steady load period for each test result.
  • Click the Create TP Report button (f) to create the report.


Viewing a TP Report

The TP Report will be created in a new tab. It will have the same appearance and functionality as the original report described here.

  • A TP test summary report with high-level calculations. The heading of the test summary will say: Multi-Test TP Report Summary.

  • All KPI graphs that display KPI data points within the selected period


  • No labels